ENSTips
PL

Przetnij model 3D i wydrukuj go!

Go to https://www.prusa3d.com/, click on software and select your OS. Install the prusa slicer.
This software is a “slicer”, it is used to prepare the 3d model to be 3d printed, to transform the STL file into a G-code readable for the 3d printer.
But in our case, we will just use this software to edit the 3d model. But of course, if you have a prusa 3d printer you will also use this software to 3d print the slices.
So open the .STL file that you have just saved with SLICER.
Click on file, then import STL/OBJ etc …

Kliknij rotate i obróć model o 90°, aby ustawić go pionowo.

Po zakończeniu kliknij cut i ustaw żądaną grubość — ja ustawiłem 10 mm.
Na koniec kliknij perform cut.

Otrzymasz taki rezultat.

Teraz zaznacz model i ponownie wytnij przekrój. Ułóż przekroje według własnego uznania, ale najlepiej zrobić to w kolejności cięcia.

Kliknij prawym przyciskiem myszy każdy przekrój po kolei i wybierz export as STL.

And that’s it, now you have all the slices ready to be 3d printed where you want.
You can find a friend or a member of your familly which have a 3d printer or use an onlise service like shapeways or sculpteo for example.

Przykład jamy nosowej wydrukowanej w 3D.