ENSTips
PT

Corte o modelo 3D e imprima-o!

Go to https://www.prusa3d.com/, click on software and select your OS. Install the prusa slicer.
This software is a “slicer”, it is used to prepare the 3d model to be 3d printed, to transform the STL file into a G-code readable for the 3d printer.
But in our case, we will just use this software to edit the 3d model. But of course, if you have a prusa 3d printer you will also use this software to 3d print the slices.
So open the .STL file that you have just saved with SLICER.
Click on file, then import STL/OBJ etc …

Clique em rotate e gire o modelo 90° para colocá-lo na vertical.

Quando terminar, clique em cut e defina a espessura desejada; eu defini 10 mm.
Por fim, clique em perform cut.

Você obterá isto.

Agora selecione o modelo e corte novamente uma secção. Organize as secções como quiser, mas é melhor fazê-lo na ordem em que foram cortadas.

Clique com o botão direito em cada secção, uma por uma, e selecione export as STL.

And that’s it, now you have all the slices ready to be 3d printed where you want.
You can find a friend or a member of your familly which have a 3d printer or use an onlise service like shapeways or sculpteo for example.

Um exemplo de uma cavidade nasal impressa em 3D.