Go to https://www.prusa3d.com/, click on software and select your OS. Install the prusa slicer.
This software is a “slicer”, it is used to prepare the 3d model to be 3d printed, to transform the STL file into a G-code readable for the 3d printer.
But in our case, we will just use this software to edit the 3d model. But of course, if you have a prusa 3d printer you will also use this software to 3d print the slices.
So open the .STL file that you have just saved with SLICER.
Click on file, then import STL/OBJ etc …

Haz clic en rotate y gira el modelo 90° para colocarlo en vertical.
Cuando hayas terminado, haz clic en cut y establece el grosor que quieras; yo he elegido 10 mm.
Por último, haz clic en perform cut.

Obtendrás esto.

Ahora selecciona el modelo y vuelve a cortar una sección; organiza las secciones como quieras, pero es mejor hacerlo en el orden de corte.

Haz clic derecho en cada sección, una por una, y selecciona export as STL.

And that’s it, now you have all the slices ready to be 3d printed where you want.
You can find a friend or a member of your familly which have a 3d printer or use an onlise service like shapeways or sculpteo for example.
Un ejemplo de una cavidad nasal impresa en 3D.


