ENSTips
IT

Taglia il modello 3D e stampalo!

Go to https://www.prusa3d.com/, click on software and select your OS. Install the prusa slicer.
This software is a “slicer”, it is used to prepare the 3d model to be 3d printed, to transform the STL file into a G-code readable for the 3d printer.
But in our case, we will just use this software to edit the 3d model. But of course, if you have a prusa 3d printer you will also use this software to 3d print the slices.
So open the .STL file that you have just saved with SLICER.
Click on file, then import STL/OBJ etc …

Fai clic su ruota e gira il modello di 90° per posizionarlo verticalmente.

Una volta fatto, fai clic su taglia e imposta lo spessore desiderato; io ho impostato 10 mm.
Infine, fai clic su esegui taglio.

Otterrai questo risultato.

Ora seleziona il modello e taglia nuovamente una sezione; organizza le sezioni come preferisci, ma è meglio farlo nell'ordine in cui sono state tagliate.

Fai clic con il pulsante destro su ciascuna sezione, una alla volta, e seleziona esporta come STL.

And that’s it, now you have all the slices ready to be 3d printed where you want.
You can find a friend or a member of your familly which have a 3d printer or use an onlise service like shapeways or sculpteo for example.

Un esempio di cavità nasale stampata in 3D.